Publications by format

Books

Journals

Conferences

Edited Works

 

Books

J.G. Teng(Editor), J.M. Rotter(Editor); “Buckling of Thin Metal Shells”, 2003

 

J.M.F.G. Holst, J.M. Rotter, M.G. Gillie, M. Munch; “Failure Criteria for Shells on Local Supports”, 315-327, 2002

 

J.M. Rotter; “Guide for the Economic Design of Circular Metal Silos”, 235pp, 2001

 

J.M. Rotter; “Pressures, Stresses and Buckling in Metal Silos containing Eccentrically Discharging Solids: Book “, 85-104, 2001

 

J.Y. Ooi, J.F. Chen, J.M. Rotter; “Strain in a Silo Wall”, Silos: Fundamentals of Theory, Behaviour and Design, 699-715, 1998

 

J.M. Rotter, J.Y. Ooi, J.F. Chen, P.J. Tiley, I. Mackintosh, F.R. Bennett; “Flow pattern measurement in full scale silos,”, British Materials Handling Board, 1995

 

Journals

 

C. Doerich-Stavridis, J.M. Rotter; “Accurate determination of plastic collapse loads from finite element analyses “, Journal of Pressure Vessel Technology, 2010

 

C. Doerich-Stavridis, J.M. Rotter; “Behavior of cylindrical steel shells supported on local brackets “, American Society of Civil Engineers, Journal of Structural Engineering, 124, 8, 1269-1277, 2008

 

L. Chen, C. Doerich-Stavridis, J.M. Rotter; “A study of cylindrical shells under bending in the elastic-plastic range “, Steel Construction- Design and Research, 1, 1, 59-65, 2008

 

M. Gillie, A.S. Usmani, J.M. Rotter; “A structural analysis of the first Cardington test”, Journal of Constructional Steel Research, 57, 6, 581-601, 2002/06/01, ISSN 0143-974X

 

J.M. Rotter, C.J. Brown, E.H. Lahlouh; “Patterns of wall pressure on filling a square platform steel silo”, Engineering Structures, 24, 135-150, 2002/02/01

 

M.G. Gillie, J.M. Rotter; “The Effect of Patch Loads on Thin-Walled Steel Silos”, Thin Wall Struct., 40, 10, 835-852, 2002/10/01

 

J.M. Rotter; “Elephant’s foot buckling in pressurised cylindrical shells”, Stahlbau, 75, 9, 742-747, 2006/09

 

J.F. Chen, J.M. Rotter, J.G. Teng; “A simple remedy for elephant’s foot buckling in cylindrical silos and tanks”, Advances in Structural Engineering, 9, 3, 409-420, 2006

 

R.J. Goodey, C.J. Brown, J.M. Rotter; “Predicted patterns of filling pressures in thin-walled square silos”, Engineering Structures, 28, 1, 109-119, 2006, ISSN 0141-0296

 

J.F. Chen, J.M. Rotter, J.Y. Ooi, Z. Zhong; “Correlation between flow pattern and wall pressures in a full scale silo”, Engineering Structures, 2006

 

J.M.F.G. Holst, J.M. Rotter; “Axially Compressed Cylindrcal Sheels with Local Settlement”, Thin-Walled Structures, 43, 5, 811-825, 2005

 

J.F. Chen, J.M. Rotter, J.Y. Ooi, Z. Zhong; “Flow pattern measurement in a full scale silo containing iron ore”, Chemical Engineering Science, 60, 11, 3029-3041, 2005, ISSN 0009-2361

 

Z. Zhong, J.Y. Ooi, J.M. Rotter; “Predicting the handlability of a coal blend from measurements on the source coals”, Fuel, 84, 2267-2274, 2005, ISSN 0016-2361

 

J.G. Teng, X. Ling, J.M. Rotter, X.L. Ding; “Analysis of geometric imperfections in full-scale welded steel silos”, Engineering Structures, 27, 6, 938-950, 2005, ISSN 0141-0296

 

M. Gillie, A.S. Usmani, J.M. Rotter; “Bending and membrane action in concrete slabs”, Journal of Fire and Merials, 28, 139-157, 2004

 

C.Y. Song, J.G. Teng, J.M. Rotter; “Imperfection sensitivity of thin elastic cylindrical shells subject to partial axial compression”, International Journal Solids Structures, 41, 7155-7180, 2004, ISSN 0020-7683

 

R.J. Goodey, C.J. Brown, J.M. Rotter; “Verification of a 3-dimensional model for filling pressures in square thin-walled silos”, Engineering Structures, 25, 14, 1773-1783, 2003/12/01, ISSN 0141-0296

 

M.J. Cai, J.M.F.G. Holst, J.M. Rotter; “Prediction of Shell Buckling Strength under Local Axial Compression: Parametric Study on Compression Width”, , 2003

 

A.S. Usmani, J.M. Rotter, S. Lamont, A.M. Sanad, M.G. Gillie; “Fundamental principles of structural behaviour under thermal effects”, Fire Safety Journal, 36, 8, 721-744, 2002/08/01

 

M. Gillie, J.M. Rotter; “The effects of patch loads on thin-walled steel silos.”, Thin-Walled Structures, 40, 10, 835-852, 2002

 

M. Gillie, J.M.F.G. Holst, M. Muench, J.M. Rotter; “Behaviour of Silos Supported on Discrete Brackets”, International Journal of Structural Stability and Dynamics, 2, 1, 45-62, 2002

 

M. Gillie, A.S. Usmani, J.M. Rotter; “A structural analysis of the Cardington British Steel Corner Test”, Journal of Constructional Steel Research, 58, 4, 427-442, 2002, ISSN 0143-974X

 

J.F. Chen, S.K. Yu, J.Y. Ooi, J.M. Rotter; “Finite element modelling of filling pressures in a full-scale silo”, ASCE J. Eng. Mech., 127, 10, 1058-1066, 2001/10/01

 

J.F. Chen, S.K. Yu, J.Y. Ooi, J.M. Rotter; “Finite element modelling of filling pressures in a full–scale silo”, Journal of Engineering Mechanics ASCE, 127, 10, 1058-1066, 2001

 

A.S. Usmani, J.M. Rotter, S. Lamont, A.M. Sanad, M. Gillie; “Fundamental principles of structural behaviour under thermal effects,”, Fire Safety Journal, 36, 8, 721-744, 2001, ISSN 0379-7112

 

M. Gillie, A.S. Usmani, J.M. Rotter; “Modelling of heated composite floor slabs with reference to Cardington experiments”, Fire Safety Journal, 2001

 

A.M. Sanad, J.Y. Ooi, J.M.F.G. Holst, J.M. Rotter; “Computations of granular flow and pressures in a flat bottomed silo”, Journal of Engineering Mechanics ASCE, 127, 10, 1033-1043, 2001, ISSN 0733-9399

 

A.M. Sanad, J.Y. Ooi, J.M.F.G. Holst, J.M. Rotter; “Numerical computations of granular flow and pressures in a flat bottomed silo”, ASCE J. Eng. Mech., 127, 10, 1033-1043, 2001

 

Z. Zhong, J.Y. Ooi, J.M. Rotter; “The sensitivity of silo flow and wall pressures to filling method”, Engineering Structures, 23, 756-767, 2001

 

A.M. Sanad, S. Lamont, A.S. Usmani, J.M. Rotter; “Structural behaviour in fire compartment under different heating regimes-Part2 (Slab mean temperatures),”, Fire Safety Journal, 2000

 

A.M. Sanad, S. Lamont, A.S. Usmani, J.M. Rotter; “Structural behaviour in fire compartment under different heating regimes-Part1 (Slab thermal gradients),”, Fire Safety Journal, 2000

 

A.M. Sanad, J.M. Rotter, A.S. Usmani, M.A. O’Connor; “Composite beams in large buildings under fire – Numerical modelling and structural behaviour,”, Fire Safety Journal, 2000

 

A.M. Sanad, J.M. Rotter, A.S. Usmani, M.A. O’Connor; “Composite beams in large buildings under fire – Numerical modelling and structural behaviour,”, Fire Safety Journal, 2000

 

A.M. Sanad, S. Lamont, A.S. Usmani, J.M. Rotter; “Structural behaviour in fire compartment under different heating regimes-Part 2 (slab mean temperatures),”, Fire Safety Journal, 2000

 

A.M. Sanad, S. Lamont, A.S. Usmani, J.M. Rotter; “Structural behaviour in fire compartment under different heating regimes-Part 1 (slab thermal gradients),”, Fire Safety Journal, 2000

 

W. Guggenberger, R. Greiner, J.M. Rotter; “The Behaviour of Locally-Supported Cylindrical Shells: Unstiffened Shells”, Journal of Constructional Steel Research, 56, 2, 175-197, 01/11/2000

 

J.M.F.G. Holst, J.M. Rotter, C.R. Calladine; “Imperfections and buckling in cylindrical shells with consistent residual stresses”, Journal of Constructional Steel Research, 54, 265-282, 01/03/2000

 

C.J. Brown, E.H. Lahlouh, J.M. Rotter; “Experiments on a square planform steel silo”, Chemical Engineering Science, 55, 20, 4399-4413, 01/10/2000

 

A.M. Sanad, S. Lamont, A.S. Usmani, J.M. Rotter; “Structural behaviour in fire compartment under different heating regimes – Part 2 (slab mean temperatures)”, Fire Safety Journal, 35, 2, 117-130, 01/02/2000

 

A.M. Sanad, S. Lamont, A.S. Usmani, J.M. Rotter; “Structural behaviour in fire compartment under different heating regimes – Part 1 (slab thermal gradients)”, Fire Safety Journal, 35, 2, 99-116, 01/02/2000

 

A.M. Sanad, J.M. Rotter, A.S. Usmani, M.A. O’Connor; “Composite beams in large buildings under fire – numerical modelling and structural behaviour”, Fire Safety Journal, 35, 3, 165-188, 01/03/2000

 

P.A. Berry, J.M. Rotter, R.Q. Bridge; “*****Compression tests on cylinders with circumferential weld depressions”, ASCE Journal Engineering Mechanics, 126, 4, 405-413, April 2000

 

C.J. Brown, E.H. Lahlouh, J.M. Rotter; “Experiments on a square planform steel silo”, Chemical Engineering Science, 55, 20, 4399-4413, 2000

 

J.M.F.G. Holst, J.Y. Ooi, J.M. Rotter, G.H. Rong; “Numerical modelling of silo filling – Part 1: problem description and finite element analyses.”, Journal of Environmental Engineering, American Society of Civil Engrs,, 125, 1, 1999

 

J.M.F.G. Holst, J.M. Rotter, J.Y. Ooi, G.H. Rong; “Numerical modelling of silo filling – Part 2: discrete element analyses and comparisons.”, Journal of the Engineering Mechanics Division, ASCE,, 125, 1, 1999

 

J.M.F.G. Holst, J.M. Rotter, C.R. Calladine; “Imperfections in cylindrical shells resulting from fabrication misfits.”, Journal of the Engineering Mechanics Division, ASCE,, 1999

 

J.M.F.G. Holst, J.M. Rotter, C.R. Calladine; “Imperfections and buckling in cylindrical shells with consistent residual stresses.”, Journal of Constructional Steel Research, 125, 4, 1999

 

J.M.F.G. Holst, J.M. Rotter, C.R. Calladine; “Imperfections in Cylindrical Shells resulting from Fabrication Misfits”, ASCE J. Eng. Mech., 125, 4, 410-418, 01/04/1999

 

J.M.F.G. Holst, J.M. Rotter, J.Y. Ooi, G.H. Rong; “Numerical modelling of silo filling, part 1: problem description and continuum predictions”, ASCE J. Eng. Mech., 125, 1, 94-103, 01/01/1999

 

J.F. Chen, J.M. Rotter, J.Y. Ooi; ““A review of numerical prediction methods for silo wall pressures” “, Advances in Structural Engineering, 2, No. 2 , 119-135, 1999

 

J.M. Rotter, J.M.F.G. Holst, J.Y. Ooi, A.M. Sanad; “Silo pressure predictions using discrete element and finite element analyses.”, Philosophical Transactions of the Royal Society London A, 356, 1747, 1998

 

J.F. Chen, J.M. Rotter; “Effective Cross-Sections of Asymmetric Rings for Cylindrical Shells”, ASCE Journal Struct. Eng., 124, 9, 1074-1080, 1998

 

J.Y. Ooi, J.M. Rotter, R.A. Lohnes; “Constitutive equations for crushed coal”, Transaction, Society for Mining, Metallurgy and Exploration Inc, 302, none, 135-140, 01/06/1998

 

J.M. Rotter; “Development of proposed European design rules for buckling of axially compressed cylinders”, Advances in Structural Engineering, 1, 4, 273-286, 01/07/1998

 

J.M.F.G. Holst, J.M. Rotter, J.Y. Ooi, G.H. Rong; “Numerical modelling of silo filling- Part II: Discrete element analyses and comparisons”, ASCE J. Eng. Mech., 125, 1, 104-110, 01/01/1998

 

J.M.F.G. Holst, J.M. Rotter, J.Y. Ooi, G.H. Rong; “Numerical modelling of silo filling- Part I: Problem description and continuum mechanics”, ASCE J. Eng. Mech., 125, 1, 94-103, 01/01/1998

 

J.M. Rotter, J.M.F.G. Holst, J.Y. Ooi, A.M. Sanad; “Silo pressure predictions using discrete element and finite element analyses”, Phil. Trans. Royal Society of London: Philosophical Transactions: Mathematical, Physical and Engineering Sciences, 356, 1747, 2685-2712, 01/11/1998

 

J.M. Rotter; “Shells and containment structures”, Progress in Structural Engineering and Materials, 1, 4, 357-358, 01/07/1998

 

J.M. Rotter; “Metal silos”, Progress in Structural Engineering and Materials, 1, 4, 428-435, 01/07/1998

 

J.F. Chen, J.M. Rotter, J.Y. Ooi; “Statistical inference of unsymmetrical silo pressures from comprehensive wall strain measurements”, Thin Wall Struct., 31, 1-3, 117-136, 01/03/1998

 

J.Y. Ooi, J.F. Chen, J.M. Rotter; “Measurement of solids flow patterns in a gypsum silo”, Powder Tech., 99, 3, 272-284, 01/03/1998

 

J.M. Rotter; “Shell structures: the new European standard and current research needs”, Thin Wall Struct., 31, 1-3, 3-23, 01/06/1998

 

J.F. Chen, J.M. Rotter, J.Y. Ooi; “A review of numerical prediction methods for silo wall pressures”, Advances in Structural Engineering, 2, 2, 119-136, 1998

 

J.Y. Ooi, J.M. Rotter, R.A. Lohnes; “Constitutive equations for crushed coal,”, Transaction, Society for Mining, Metallurgy and Exploration Inc, 1997

 

J.F. Chen, J.Y. Ooi, J.M. Rotter; “A rigorous statistical technique for inferring circular silo wall pressures from wall strain measurements,”, Engineering Structures, 1996

 

G.R. Watson, J.M. Rotter; “A Finite Element Analysis of Planar Granular Solids Flow”, Chemical Engineering Science, 51, 16, 3967-3978, 01/06/1998

 

A.Y. Elghazouli, J.M. Rotter; “Long-Term Performance and Assessment of Circular Reinforced Concrete Silos”, Construction and Building Materials, 10, 2, 117-122, 01/02/1996, ISSN 0950-0618

 

J.F. Chen, J.Y. Ooi, J.M. Rotter; “Local stiffening effect of ‘double deck’ strain gauges: Part 1″, Strain, 32, 1, 13-22, 01/02/1996, ISSN 0039-2103

 

X.L. Ding, R.D. Coleman, J.M. Rotter; “Technique for precise measurement of large-scale silos and tanks”, Journal of Surveying Engineering, ASCE, 122, 1, 14-25, 01/02/1996

 

X.L. Ding, R.D. Coleman, J.M. Rotter; “Surface profiling system for measurement of engineering structures”, Journal of Surveying Engineering, ASCE, 122, 1, 3-13, 01/02/1996

 

J.F. Chen, J.Y. Ooi, J.M. Rotter; “Local stiffening effect of ‘double deck’ strain gauges: Part 2 “, Strain, 32, 2, 43-48, 01/05/1996, ISSN 0039-2103

 

J.F. Chen, J.Y. Ooi, J.M. Rotter; “A rigorous statistical technique for inferring circular silo wall pressures from wall strain measurements”, Engineering Structures, 18, 4, 321-331, 01/04/1996, ISSN 0141-0296

 

J.G. Teng, J.M. Rotter; “Stability Assessment of Complex Shell Structures by Numerical Analysis”, Conference Proceedings, CE37, 1, 1995

 

J.M. Rotter; “Proposal for cylinder axial compression buckling strength to be described in terms of amplitude of imperfection”, Submission to ECCS TWG8.4, CEN TC250/SC3 PT3 andCEN TC250/SC3 PT4, 1995

 

J.Y. Ooi, J.F. Chen, R.A. Lohnes, J.M. Rotter; “Prediction of static wall pressures in coal silos”, Construction and Building Materials, 10, 2, 109-116, 01/03/1996, ISSN 0950-0618

 

P.A. Berry, R.Q. Bridge, J.M. Rotter; “Imperfection measurement of cylinders using automated scanning with a laser displacement meter”, Strain, 32, 1, 3-7, 01/02/1996

 

J.G. Teng, J.M. Rotter; “Structural Consequences of Filling and Flow Pressures in Steel Hoppers”, Transactions of Mechanical Engineering, Special Ed. on Bulk Materials Handling, Institution of Engineers, Australia,, ME18, 1, 1993

 

J.M. Rotter, R. Greiner, W. Guggenberger, H.Y. Li, K.M. She; “Proposed Design Rule for Buckling Strength Assessment of Cylindrical Shells under Local Axial Loads”, submission to ECCS TWG8.4 Buckling of Shells, 1993

 

J.G. Teng, J.M. Rotter; “Recent Research on the Behaviour and Design of Steel Silo Hoppers and Transition Junctions”, Special Edition on Australian Research, Journal of Constructional Steel Research,, 23, 1992

 

J.G. Teng, J.M. Rotter; “Linear Bifurcation of Column-Supported Perfect Cylinders: Support Modelling and Boundary Conditions”, Thin Wall Struct., 14, 2, 1992

 

J.G. Teng, J.M. Rotter; “Buckling of Pressurized Axisymmetrically Imperfect Cylinders under Axial Loads”, American Society of Civil Engineers, Journal Engineering Mechanics,, 118, 2, 1992

 

J.F. Chen, J.M. Rotter, J.Y. Ooi; ” “Local stiffening effect of ‘double deck’ bending strain gauges: Part 1″”, Strain, 32, No. 1 , 13-22, 18/6/1905

 

J.M. Rotter, J.Y. Ooi; “Discussion on the paper by Blight on defects in accepted methods of estimating design loading for silos”, Proc. I.C.E., 90, Part 1, 1077-1082, 13/6/1905

 

J.Y. Ooi, J.M. Rotter; “Elastic predictions of pressures in conical silo hoppers”, Engineering Structures, 13, No. 1, 38323, 13/6/1905

 

J.Y. Ooi, J.M. Rotter; “Wall pressures in squat steel silos from finite element analysis”, Computers and Structures, 37, No. 4, 361-374, 13/6/1905

 

J.Y. Ooi, J.M. Rotter; “Elastic and plastic predictions of the storing pressures in conical hoppers”, Transactions of Mechanical Engineering, ME14, No. 3, 165-169, 11/6/1905

 

J.M. Rotter, J.M.F.G. Holst, J.Y. Ooi, A.M. Sanad; ““Silo pressure predictions using discrete element and finite element analyses” “, Phil. Trans. R. Soc. Lond. A , 356, No. 1747, 2685-2712, 20/6/1905

 

A.M. Sanad, J.Y. Ooi, J.M.F.G. Holst, J.M. Rotter; ” “Computations of granular flow and pressures in a flat bottomed silo””, Journal of Engineering Mechanics ASCE, 127, 10 , 1033-1043, 23/6/1905

 

J.M.F.G. Holst, J.M. Rotter, J.Y. Ooi, G.H. Rong; ““Numerical modeling of silo filling – Part 2: discrete element analyses and comparisons””, Journal of Engineering Mechanics ASCE, 125, No. 1 , 104-110, 21/6/1905

 

J.M.F.G. Holst, J.Y. Ooi, J.M. Rotter, G.H. Rong; ““Numerical modeling of silo filling – Part 1: problem description and continuum analyses””, Journal of Engineering Mechanics ASCE, 125, No. 1 , 94-103 104-110, 21/6/1905

 

J.M.F.G. Holst, J.M. Rotter, J.Y. Ooi, G.H. Rong; “Numerical modelling of silo filling, part 2: discrete element predictions and comparisons”, ASCE J. Eng. Mech., 125, 1, 104-110

 

Conferences

 

C. Doerich-Stavridis, W. Vanlaere, G. Lagae, J.M. Rotter; “Stability of column-supported steel cylinders with engaged columns”, Proceedings of the IASS Symposium 2009, Valencia, Spain, September 2009

 

M. Batikha, J.F. Chen, J.M. Rotter; “FRP strengthening of metallic cylindrical shells against elephant‘s foot buckling”, Advanced Composites in Construction (ACIC-2007), 157-164, 2007/04

 

M. Batikha, J.F. Chen, J.M. Rotter; “Numerical modelling of shells repaired using FRP”, 3rd Int.Conf. on steel and composites structures (ICSCS07), 1065-1069, 2007/07

 

M. Batikha, J.F. Chen, J.M. Rotter; “Elastic buckling of FRP-strengthened cylinders with axisymmetric imperfections”, Asia-Pacific Conference on FRP in Structures (APFIS2007), 1011-1016, 2007/12

 

M. Batikha, J.F. Chen, J.M. Rotter; “Strengthening metallic shells with FRP against buckling”, 4th int. conf. on FRP composites in civil engineering (CICE2008), 6pp, 2008/07

 

M. Batikha, J.F. Chen, J.M. Rotter; “Fibre reinforced polymer composites to increase the buckling strength of imperfect cylindrical shells”, Proc., Int. Conf. on structures and granular solids: From scientific to engineering applications, 177-181, 2008/07

 

L. Chen, C. Doerich-Stavridis, J.M. Rotter; “A study of cylindrical shells under bending in the elastic-plastic range”, Proc., Eurosteel 2008 Conference, Graz, Austria, 3-5 September, 1503-1508, 2008

 

C. Doerich-Stavridis, J.M. Rotter; “Generalised capacity curves for stability and plasticity: application and limitations”, Proc., Eurosteel 2008 Conference, Graz, Austria, 3-5 September, 1491-1496, 2008

 

M. Gillie, A.S. Usmani, J.M. Rotter; “Bending and membrane action in concrete slabs”, Proceedings of Second International Structures in Fire Workshop, 95-114

 

 

 

T A Bell, E J Catalano, Z. Zhong, J.Y. Ooi, J.M. Rotter; “Evaluation of Edinburgh Powder Testrer (EPT)”, International Congress on Particle Technology , Nuremberg, 27-29 March 2007

 

J.M. Rotter, J.Y. Ooi, Z. Zhong; “Critical pressure conditions in silos”, Proc. 5th Int. Conf. Conveying and Handling of Particulate Solids, 6pp, August 2006

 

X.Z. Lu, J.F. Chen, L.P. Ye, J.G. Teng, J.M. Rotter; “Theoretical analysis of FRP stress distribution in U jacketed RC beams”, Composites in Construction 2005 – Third International Conference, 541-548, July 11-13, 2005

 

J.F. Chen, J.M. Rotter, J.G. Teng; “Strengthening silos and tanks against elephant’s foot buckling”, The 4th International Conference on Advances in Steel Structures, 459-466, June 2005

 

X.Z. Lu, J.F. Chen, L.P. Ye, J.G. Teng, J.M. Rotter; “Theoretical analysis of FRP stress distribution in side-bonded RC beams”, Proceedings International Symposium on Bond Behaviour of FRP in Structures (BBFS2005), 363-369, 2005

 

Z. Zhong, J.Y. Ooi, J.M. Rotter; “Large Scale Semi-Automated Tester for Rapid Assessment of Coal Handling Performance”, The Coal research forum – Autumn meeting 2005, 14th Sept. 2005

 

Z. Zhong, J.Y. Ooi, J.M. Rotter; “On – site assessment of coal handlability”, Coal Research Forum, 6th April 2005

 

J.Y. Ooi, J.M. Rotter, Z. Zhong, S. Wang; “Arching Propensity in Coal Bunkers with Non-Symmetric Geometries”, The Coal research forum – Autumn meeting 2005, 14th Sept. 2005

 

J.M. Rotter, J.Y. Ooi, Z. Zhong; “A statistical evaluation of filling and discharging pressures on silo walls”, Proc., 7th World Cong Chem Engrg, 10th – 14th July, 2005

 

J.M.F.G. Holst, C. Doerich-Stavridis, J.M. Rotter; “Accurate determination of the plastic collapse loads of shells when using finite element analyses”, Proceedings of the 4th International Conference on Advances in Steel Structures, Shanghai, June, 2005

 

C. Doerich-Stavridis, J.M. Rotter; “Non-linear computations of cylindrical shells on local bracket supports”, Proceedings of the 5th International Conference on Computation of Shell and Spatial Structures, Salzburg,, 2005

 

S.K. Yu, J.F. Chen, J.Y. Ooi, J.M. Rotter, P. Olomolaiye; “A finite element study on progressive filling pressures in squat silos”, 17th ASCE Engineering Mechanics Conference, 9pp, 13-16 June 2004

 

Z. Zhong, J.Y. Ooi, J.M. Rotter; “Coal blend: measurement and prediction of handleability”, Coal Research Forum 2004, 31st March 2004

 

Z. Zhong, J.Y. Ooi, J.M. Rotter; “Practical assessment of coal handleability – overview”, 5th European Conference: Coal research and its application, 2004

 

Z. Zhong, J.Y. Ooi, J.M. Rotter; “Predicting the handlability of a coal blend and optimising the blending process”, 5th European Conference: Coal research and its application, 6-8th Sept. 2004

 

M. Cai, J.M.F.G. Holst, J.M. Rotter; “Parametric Study on the Buckling of Thin Steel Cylindrical Shells under Elevated Axial Compression Stresses”, Proc. 16th ASCE Engineering Mechanics Conference, Washington University, Seattle, 2003/07/16

 

J.W. Carson, H. Purutyan, J.M. Rotter; “The dangers of relying on wall friction values in codes”, Proceedings 4th International Conference for Conveying and Handling of Particulate Solids, 6.12-6.18, 2003

 

J.M.F.G. Holst, J.M. Rotter; “Nonlinear response and buckling of cylindrical tanks due to foundation settlement”, Proc.,International conference on design, inspection and maintenance of cylindrical steel tanks and pipelines, Prague, Czech Republic, 29-35, 2003/10/09

 

M. Cai, J.M.F.G. Holst, J.M. Rotter; “Buckling of cylindrical tank shells under local axial compression stresses “, Proceedings International Conference on design, inspection and maintenance of cylindrical steel tanks and pipelines, Prague, Czech Republic, 70-76, 2003

 

Z. Zhong, J.Y. Ooi, J.M. Rotter; “Large scale semi automated cohesion tester for rapid assessment of coal handling performance”, Coal Research Forum, 2003

 

J.M.F.G. Holst, J.M. Rotter; “Buckling strength of cylinders with a consistent residual stress state “, Proceedings International Conference on Advances in Steel Structures, ICASS’02, Hong Kong, , Vol.II, 729-736, 2002

 

J.M. Rotter; “Advanced computer calculations in the design of shell structures Invited plenary paper”, Proceedings International Conference on Advances in Steel Structures, ICASS’02, Hong Kong, Vol.I, 27-42, 2002

 

M. Cai, J.M.F.G. Holst, J.M. Rotter; “Buckling strength of thin cylindrical shells under localised axial compression”, Proc. 15th ASCE Engineering Mechanics Conference, 2002

 

M. Gillie, A.S. Usmani, J.M. Rotter; “Bending and membrane action in concrete slabs”, Proceedings of the Second International Structures in Fire Workshop, 95-114, 2002

 

S.K. Yu, J.F. Chen, P. Olomolaiye, J.Y. Ooi, J.M. Rotter; “Finite element predictions of progressive filling pressures in a ring stiffened imperfect full-scale silo”, 15th Engineering Mechanics Conference (EM2002) of the ASCE, 8pp, 2002

 

M. Gillie, J.M.F.G. Holst, M. Muench, J.M. Rotter; “Behaviour of silos on discrete eccentric supports”, Conference Proceedings, 2001

 

J.M.F.G. Holst, J.M. Rotter; “Geometric Imperfections, Residual Stresses and Buckling in Cylindrical Shells with Local Support Settlement “, Proceedings European Mechanics Conference: Euromech 424, Rolduc-Kerkrade, Germany, 36-37, 2001

 

J.M. Rotter; “The new European standards for shells and their use in analysis and design”, Proceedings European Mechanics Conference: Euromech 424, Invited Keynote Lecture, Rolduc-Kerkrade, Germany, 76-78, 2001

 

J.M. Rotter; “Shell Analysis and its Use in Design within the Framework of the new European Standard “, Second European Conference on Computational Mechanics, Invited Keynote Paper, Cracow, Poland, 118-119, 2001

 

R.J. Goodey, C.J. Brown, J.M. Rotter; “Finite element predictions of filling wall pressures in a square silo”, Proceedings, Seventh International Conference on Bulk Materials Storage, Handling and Transportation, Newcastle, 163-172, 2001

 

M. Gillie, J.M.F.G. Holst, M. Muench, J.M. Rotter; “Behaviour of silos on discrete supports”, ASCE/ASME Mechanics and Materials Conference, 335-354, 2001

 

S. Lamont, A.S. Usmani, D.D. Drysdale, J.M. Rotter; “Fire Protection of Steel Beams in Composite Framed Structures”, 9th International Fire Science and Engineering Conference (Interscience Communiations 2001), 407-418, 2001

 

Z. Zhong, J.M. Rotter, J.Y. Ooi, B. Armstrong; “Rapid assessment of handling performance for coals”, Proc. Coal Prep 2001, 18th International Coal Preparation Exhibition and Conference, Lexington, Kentucky, , 1-3 May 2001

 

Z. Zhong, J.Y. Ooi, J.M. Rotter; “Can sticky coals be sweetened to achieve good handlability?”, Conference on Preparation, Properties and Applications of Coal-based Carbon Materials, 27-28th 2001

 

Z. Zhong, J.M. Rotter, J.Y. Ooi, B. Armstrong; “Rapid assessment of handling performance for coals”, Proc Coal Prep 2001, 18th International Coal Preparation Exhibition and Conference, 6pp, 2001

 

J.M. Rotter; “Web database on silo pressure literature”, European Federation of Chemical Engineers, Working Party on the Mechanics of Particulate Solids, 4pp, March 2001

 

A.M. Sanad, J.M.F.G. Holst, J.Y. Ooi, J.M. Rotter, S. Masson, J. Martinez, D. Guines, E. Ragneau; “Numerical simulations of a direct shear test simulations from Britain and France”, Conference Proceedings, 2000

 

A.M. Sanad, J.M.F.G. Holst, J.Y. Ooi, J.M. Rotter; “Numerical computations of granular flow and pressures in a silo”, Proc. 14th Engineering Mechanics Conference, 01/05/2000

 

J.M. Rotter, A.S. Usmani; “Fundamental principles of structural behaviour under thermal effects (large composite buildings under compartment fires) “, Proceedings First International Workshop on the Performance of Structures in Fire SiF’00, Copenhagen, 41640, 19-20 June 2000

 

J.M. Rotter; “Structural design of silos and the new Eurocodes “, Proc. ‘From Powder to Bulk’, I.Mech.E. Conference on Powder and Bulk Solids Handling, , 153-168, 01/06/2000

 

Z. Zhong, J.Y. Ooi, J.M. Rotter; “Nonlinear effects of blending on coal handling behaviour”, Proc. ‘From Powder to Bulk’, I.Mech.E. Conference on Powder and Bulk Solids Handling, 17-26, 01/06/2000

 

A.M. Sanad, J.M.F.G. Holst, J.Y. Ooi, J.M. Rotter, S. Masson, J. Martinez, D. Guines, E. Ragneau; “Numerical simulations of a direct shear box test”, Proc. ‘From Powder to Bulk’, I.Mech.E. Conference on Powder and Bulk Solids Handling, 83-95, 01/06/2000

 

J.F. Chen, S.K. Yu, J.Y. Ooi, J.M. Rotter; “Finite element prediction of filling pressures in a ring stiffend imperfect full-scale silo”, 14th Engineering Mechanics Conference (EM2000) of the ASCE, 21-24 May 2000

 

A.M. Sanad, A.S. Usmani, J.M. Rotter, M. Gillie, D.D. Drysdale; “Finite Element Model For The First Cardington Fire Test”, Conference Proceedings, 1999

 

J.M. Rotter; “Behaviour of highly redundant buildings under compartment fires Invited plenary paper, “, Proceedings International Conference on Advances in Steel Structures, ICASS’99, Vol. 1, Hong Kong, , 39-50, 01/12/1999

 

J.M. Rotter; “Flow and pressures in silo structural integrity assessments “, Proceedings International Symposium: Reliable Flow of Particulate Solids III, Porsgrunn, Norway, , 281-292, 01/08/1999

 

J.Y. Ooi, R.A. Lohnes, Z. Zhong, J.M. Rotter; “Capillary water and the unconfined strength of crushed coal”, Proceedings International Symposium: Reliable Flow of Particulate Solids III, Porsgrunn, Norway, 66-75, 01/08/1999

 

A.M. Sanad, J.M. Rotter, A.S. Usmani, M.A. O’Connor; “Finite element modelling of fire tests on the Cardington composite building”, Proceedings Interflam ’99, 8th International Fire Science and Engineering Conference, Edinburgh, Vol.2, 1045-1056, 29 June – 1 July 1999

 

J.M. Rotter, A.M. Sanad, A.S. Usmani, M. Gillie; “Structural performance of redundant structures under local fires”, Proceedings Interflam ’99, 8th International Fire Science and Engineering Conference, Edinburgh, Vol.2, 1069-1080, 29 June – 1 July 1999

 

A.M. Sanad, J.M. Rotter, A.S. Usmani, M.A. O’Connor; “Finite element model the first Cardington Fire Test”, Proceedings 6th International Symposium on Fire Safety Science, Poitiers, France, 01/07/1999

 

J.M. Rotter, I.D. Moore, J.Y. Ooi, J.M.F.G. Holst, A.D. Stove; “Effect of non-uniform wall friction on filling pressures in silos. In Proceedings of the 6th International Conference on Bulk Materials Storage, Handling and Transportation.”, Conference Proceedings, 1998

 

J.Y. Ooi, J.M. Rotter, E.H. Lahlouh, Z. Zhong; “Blind trial on coals for rapid handling assessment”, Proceedings, Sixth International Conference on Bulk Materials Storage, Handling and Transportation, Wollongong, 73-78, Sept. 1998

 

R. Greiner, J.M. Rotter, H. Schmidt; “The new Eurocode on strength and stability of steel shell structures”, Proceedings Nordic Steel Structures Conference, , Vol.I., 15-16 Sept 1998

 

J.M. Rotter, I.D. Moore, J.Y. Ooi, J.M.F.G. Holst, A.D. Stove; “Effect of Non-uniform Wall Friction on Filling Pressures in Silos”, Sixth International Conference on Bulk Materials Storage, Handling and Transportation, Wollongong, 425-434, Sept. 1998

 

A.M. Sanad, J.Y. Ooi, J.M.F.G. Holst, J.M. Rotter; “Finite element and discrete element modelling of silo discharge”, Sixth International Conference on Bulk Materials Storage, Handling and Transportation, Wollongong, , 443-450, Sept. 1998

 

G.G.H. Rong, J.Y. Ooi, J.M. Rotter; “Discrete Element Modelling of Particulate Solids in Silos”, Conference Proceedings, 1997

 

J.M.F.G. Holst, J.M. Rotter, C.R. Calladine; “Characteristic geometric imperfection forms for cylinders derived from misfit calculations. In Carrying Capacity of Steel Shell Structures, eds V. Krupka & P. Schneider, 333-339.”, Conference Proceedings, 1997

 

P.A. Berry, R.Q. Bridge, J.M. Rotter; “Experiments on the buckling of axially compressed fabricated steel cylinders with axisymmetric imperfections”, Proceedings Int. Conf. on Carrying Capacity of Steel Shell Structures, Brno, 347-353, 1-3 October 1997

 

J.F. Chen, J.M. Rotter; “Stresses in asymmetric ring stiffeners for cylindrical shells “, Proceedings Int. Conf. on Carrying Capacity of Steel Shell Structures, Brno, 340-346., 1-3 October 1997

 

J.M.F.G. Holst, J.M. Rotter, C.R. Calladine; “Characteristic imperfection forms for cylinders derived from misfit calculations”, Proceedings Int. Conf. on Carrying Capacity of Steel Shell Structures, Brno, 333-339, 1-3 October 1997

 

J.M.F.G. Holst, J.M. Rotter, C.R. Calladine; “Geometric imperfections and consistent residual stress fields in elastic cylinder buckling under axial compression. In Proc. Int. Workshop on Imperfections in Metal Silos: Measurement, Characterisation, and Strength Analysis, 199-216.”, Conference Proceedings, 1996

 

G.H. Rong, J.M.F.G. Holst, J.Y. Ooi, J.M. Rotter; “An international comparison of discrete element and finite element methods for predicting silo filling phenomena.”, Conference Proceedings, 1996

 

J.F. Chen, J.Y. Ooi, J.M. Rotter; “A method for determining unsymmetrical pressures in circular silos using wall strain measurements”, Proceedings International Conference on Advances in Steel Structures, ICASS  96, Hong Kong, 781-787, 01/12/1996

 

H.Y. Li, J.M. Rotter; “Algebraic analysis of elastic circular cylindrical shells under local loadings (Part 1 and Part 2) “, Proceedings International Conference on Advances in Steel Structures, ICASS  96, Hong Kong, 801-807 and 808-814., 01/12/1996

 

J.M. Rotter; “Shell structures: design standards, recent progress and unsolved problems”, Invited plenary paper, Proceedings International Conference on Advances in Steel Structures, ICASS  96, Hong Kong, 621-636, 01/12/1996

 

J.Y. Ooi, J.M. Rotter, R.A. Lohnes; “Simple modelling and finite element calculations of pressures for coal silos”, Proceedings 12th International Congress of Chemical and Process Engineering, CHISA ’96, Prague, 11, 01/08/1996

 

J.Y. Ooi, J.M. Rotter, G.H. Rong, M.R. Holst; “An international comparison of Discrete Element and Finite Element methods for predicting silo filling phenomena”, Proceedings 12th International Congress of Chemical and Process Engineering, CHISA ’96, Prague, 11, 01/08/1996

 

J.M.F.G. Holst, J.M. Rotter, C.R. Calladine; “Geometric imperfections and consistent residual stress fields in elastic cylinder buckling under axial compression “, Proc. International Workshop on Imperfections in Metal Silos: Measurement, Characterisation and Strength Analysis, CA-Silo, Lyon, France, 199-216, 19/04/1996

 

J.M. Rotter; “Elastic plastic buckling and collapse in internally pressurised axially compressed silo cylinders with measured axisymmetric imperfections: interactions between imperfections, residual stresses and collapse”, Proc. International Workshop on Imperfections in Metal Silos: Measurement, Characterisation and Strength Analysis, CA-Silo, Lyon, France, 119-140, 19/04/1996

 

J.F. Chen, P.J. Tiley, J.Y. Ooi, J.M. Rotter; “Flow patterns and pressures in an iron ore silo,”, Proceedings 12th International Congress of Chemical and Process Engineering, CHISA ’96, Prague, 9pp, 1996

 

Z. Zhong, J.Y. Ooi, J.M. Rotter; “The sensitivity of silo flow and wall pressures to filling methods”, Proceedings 12th International Congress of Chemical and Process Engineering, CHISA ’96, Prague, 12, 01/08/1996

 

J.Y. Ooi, J.M. Rotter, R.A. Lohnes; “Simple modelling and finite element calculations of pressures for coal silos,”, Conference Proceedings, 1995

 

J.F. Chen, K.F. Zhang, J.Y. Ooi, J.M. Rotter; “Visualisation of Solids Flow in a Full Scale Silo”, 3rd European Symposium: Storage and Flow of Particulate Solids, 427-436, 21-23 March 1995

 

I. Mackintosh, P.J. Tiley, J.Y. Ooi, J.M. Rotter; “Bending Moments and Wall Pressures in Full Scale Eccentric Discharge Experiments”, 3rd European Symposium: Storage and Flow of Particulate Solids, 231-240, 21-23 March 1995

 

P.A. Berry, J.M. Rotter; “Partial axisymmetric imperfections and their effect on the buckling strength of axially compressed cylinders”, Proc. International Workshop on Imperfections in Metal Silos: Measurement, Characterisation and Strength Analysis, CA-Silo, Lyon, France, 35-48, 19/04/1996

 

H. Wilms, J.M. Rotter, J. Tomas; “Comparative pressure calculations using different codes”, 3rd European Symposium: Storage and Flow of Particulate Solids, 251-260, 21-23 March 1995

 

C.J. Brown, E.H. Lahlouh, J.M. Rotter; “Eccentric discharge in rectangular planform silos”, 3rd European Symposium: Storage and Flow of Particulate Solids, 241-250, 21-23 March 1995

 

J.M. Rotter; “Challenges for the future in the design of bulk solid storages”, IABSE Colloquium on reliable containment for the future, Pembroke College, Cambridge , 11, 11/12 July 1995

 

J.F. Chen, K.F. Zhang, J.Y. Ooi, J.M. Rotter; “Numerical Predictions of Bulk Solid Pressures in Cylindrical Silos”, Proc. International Symposium of Young Chinese Experts on Structural Engineering: Research in Structural Engineering-Current Status and Trends, Shanghai, 16-18 January, 425-445, 1995

 

Z. Zhong, J.Y. Ooi, J.M. Rotter; “The effects of temperature and local stiffening on the strain measurement with DD gauges”, 1995 Annual Conference on Automated Strain Measurement and Analysis, 5th-7th September 1995

 

J.G. Teng, J.M. Rotter; “Stability Assessment of Complex Shell Structures by Numerical Analysis”, Conference Proceedings, 1994

 

J.Y. Ooi, J.M. Rotter; “Flow observations and predictions in full scale silos”, Conference Proceedings, 1994

 

J.Y. Ooi, J.M. Rotter; “Flow observations and predictions in full scale silos”, Conference Proceedings, 1994

 

J.F. Chen, J.Y. Ooi, J.M. Rotter; “Local stiffening effects of double deck bending strain gauges and its corrections”, Proceedings Advances in Engineering Measurements, British Society for Strain Measurement International Conference, Edinburgh, 32, 30 Aug. – 1 Sept 1994

 

J.F. Chen, J.Y. Ooi, J.M. Rotter, I.C. Coker, C. Lauder, K.F. Zhang, B.G. Dale; “Flow pattern measurements in a full scale silo”, Proceedings Advances in Engineering Measurements, British Society for Strain Measurement International Conference, Edinburgh, 58-63, 30 Aug. – 1 Sept 1994

 

J.Y. Ooi, J.F. Chen, J.M. Rotter; “Inferring silo wall pressures from strain measurements on the wall”, Proceedings Advances in Engineering Measurements, British Society for Strain Measurement International Conference, Edinburgh, 33-40, 30 Aug. – 1 Sept 1994

 

J.G. Teng, J.M. Rotter; “Nonlinear bifurcation analysis of axisymmetric shells under torsional loads”, Proceedings International Conference on Computational Methods in Structural and Geotechnical Engineering, 12-14 December 1994

 

J.G. Teng, J.M. Rotter; “The Strength of Circular Steel Silos: New Investigations”, Conference Proceedings, 1993

 

J.M. Rotter; “The Design of Circular Metal Silos for Strength”, Proceedings International Symposium: Reliable Flow of Particulate Solids II, 217-234, 23-24 August, 1993

 

P.A. Berry, R.Q. Bridge, J.M. Rotter; “The manufacture and testing of thin-walled cylinders with circumferential welded joints”, Proceedings Thirteenth Australasian Conference on the Mechanics of Structures and Materials, Vol.1, 81-87, 5-7 July 1993

 

J.M. Rotter, J.Y. Ooi, C. Lauder, I. Coker, J.F. Chen, B.G. Dale; “A Study of the Flow Patterns in an Industrial Silo”, Proceedings International Symposium: Reliable Flow of Particulate Solids II, 517-524, 23-24 August 1993

 

J.Y. Ooi, W.C. Soh, Z. Zhong, J.M. Rotter; “Bulk Mechanical Properties of some Dry Granular Solids”, Proceedings International Symposium: Reliable Flow of Particulate Solids II, 75-86, 23-25 August 1993

 

J.F. Chen, J.M. Rotter, J.Y. Ooi; “A Technique for the Interpretation of Silo Wall Pressures from Strain Measurements”, Proceedings International Symposium: Reliable Flow of Particulate Solids II, 255-267, 23-24 August 1993

 

J.G. Teng, J.M. Rotter; “The Strength of Circular Steel Silos: New Investigations”, Conference Proceedings, 1992

 

J.G. Teng, J.M. Rotter; “A Study of Buckling in Column-Supported Cylinders”, Conference Proceedings, 1992

 

J.M. Rotter, J.G. Teng; “Geometrically and Materially Nonlinear Behaviour in Concrete Shells of Revolution”, Proc. Euromech Colloquium 292, Modelling of Shells with Nonlinear Behaviour, Munich, 2-4 September 1992

 

J. Nielsen, J. Eibl, J.M. Rotter; “Silos and Tanks”, Proc International Association of Bridge and Structural Engineers Conference on Structural Eurocodes, Davos, Switzerland, 97-103, 14-16 Sept. 1992

 

J.M. Rotter; “Structural Problems in Steel Silos”, Proceedings International Conference on Silos – Forschung und Praxis, Universit‰t Karlsruhe, 51-63, 8-9 October 1992

 

J.M. Rotter, R. Coleman, X.L. Ding, J.G. Teng; “The Measurement of Imperfections in Cylindrical Silos for Buckling Strength Assessment”, Proceedings Fourth International Conference on Bulk Materials Storage Handling and Transportation, 473-479, 01/06/1992

 

R. Coleman, X.L. Ding, J.M. Rotter; “The Measurement of Imperfections in Full-Scale Steel Silos”, Proceedings Fourth International Conference on Bulk Materials Storage Handling and Transportation, 467-472, 01/06/1992

 

J.Y. Ooi, J.M. Rotter; “Measured pressures in full scale silos: a new understanding,”, Conference Proceedings, 1991

 

J.Y. Ooi, J.M. Rotter; “Mechanical behaviour of wheat under storage stress histories,”, Conference Proceedings, 1991

 

J.M. Rotter, J.G. Teng, H.Y. Li; “Buckling in Thin Elastic Cylinders on Column Supports”, International Colloquium on Buckling of Shell Structures on Land, in the Sea and in the Air, Villeurbanne, Lyon, France, 334-343, 17-19 Sept 1991

 

J.M. Rotter, J.Y. Ooi; “Discussion ofDefects in accepted methods of estimating design loading for silos by G.E. Blight,”, Proc. Institution of Civil Engineers, London, Part 1, Vol. 90, No. 3, Paper 9593, 1077-1088., 01/10/1991

 

X.L. Ding, R. Coleman, J.M. Rotter; “A Profile Measurement System and its Application in Precise Engineering Surveying”, 58th FIG Permanent Committee Meeting and International Symposium (Federation Internationale des Geometres), Beijing, 87-101, 2-25 May 1991

 

J.M. Rotter; “Strength Criteria for Steel Silo Structures”, Proceedings International Conference: Bulk Materials – Towards the Year 2000, 38139, October 29-31, 1991

 

J.M. Rotter, N.S. Trahair; “Behaviour of Industrial Storage Structures- A State of the Art Review”, Proceedings International Conference on Trends in Steel Structures for Mining and Building, Johannesburg, 557-577, 01/08/1991

 

A.G. McLean, B. Gorenc, J.M. Rotter, L. Pham; “Design Loading for Bulk Solids Containers”, Proceedings IEAust International Mechanical Engineering Congress Mech ’91, 8-12 July 1991

 

J.Y. Ooi, J.M. Rotter; “Unsymmetrical features of measured pressures on prototype grain silos,”, Conference Proceedings, 1990

 

J.Y. Ooi, J.M. Rotter; “Volumetric and deviatoric behaviour of wheat under triaxial testing,”, Conference Proceedings, 1990

 

J.M. Rotter; “The State of the Art: Silo Design for Structural Strength”, Proceedings 2nd European Symposium on the Stress and Strain Behaviour of Particulate Solids- Silo Stresses, Prague, 38139, 01/08/1990

 

J.M. Rotter, P.A. Berry, J.Y. Ooi; “The Discrete Rupture Surface Theory applied to Silos under Eccentric Discharge”, Proceedings 2nd European Symposium on the Stress and Strain Behaviour of Particulate Solids- Silo Stresses, Prague, 38261, 01/08/1990

 

J.M. Rotter, J. Nielsen; “On Design Values for Bulk Solid Properties for Silos”, Proceedings 2nd European Symposium on the Stress and Strain Behaviour of Particulate Solids- Silo Stresses, Prague, 38200, 01/08/1990

 

J.Y. Ooi, J.M. Rotter; “Unsymmetrical Features of Measured Pressures on Prototype Grain Silos”, Proceedings 2nd European Symposium on the Stress and Strain Behaviour of Particulate Solids- Silo Stresses, Prague, 10, 01/08/1990

 

J.Y. Ooi, J.M. Rotter; “Volumetric and Deviatoric Behaviour of Wheat under Triaxial Testing”, Proceedings 2nd European Symposium on the Stress and Strain Behaviour of Particulate Solids- Silo Stresses, Prague, 10, 01/08/1990

 

J.G. Teng, J.M. Rotter; “Strength Criteria for Welded Steel Silo Hoppers (Does the pressure distribution matter?)’”, Proceedings 2nd European Symposium on the Stress and Strain Behaviour of Particulate Solids- Silo Stresses, Prague, 11, 01/08/1990

 

J.G. Teng, J.M. Rotter; “Snap-through Buckling of Reinforced Concrete Domes”, Proc, Second International Conference on Computer Aided Analysis and Design of Concrete Structures SCI-C 90, Zell am See, Austria, , 4-6 April 1990

 

J.Y. Ooi, L. Pham, J.M. Rotter; “Systematic and random features of measured pressures on full scale silo walls,”, Conference Proceedings, 1989

 

J.Y. Ooi, J.M. Rotter; “Elastic and plastic predictions of the storing pressures in conical hoppers,”, Proceedings Third International Conference on Bulk Materials Storage Handling and Transportation, 203-215, 01/06/1989

 

J.Y. Ooi, L. Pham, J.M. Rotter; “Systematic and random features of measured pressures on full-scale silo walls”, Proceedings Third International Conference on Bulk Materials Storage Handling and Transportation, 12, No. 2 April, 256-263, 01/06/1989

 

J.G. Teng, J.M. Rotter; “The Strength of Silo Transition Rings and Hoppers”, Proceedings Third International Conference on Bulk Materials Storage Handling and Transportation, 208-215, 01/06/1989

 

J.M. Rotter, Q. Zhang; “The Strengthening Effect of Stored Solids on the Buckling of Cylindrical Steel Silos, “, Proceedings Third International Conference on Bulk Materials Storage Handling and Transportation, 216-222, 01/06/1989

 

J.Y. Ooi, J.M. Rotter, T.S. Hull; “Triaxial testing of dry granular solids at very low stresses,”, Conference Proceedings, 1988

 

J.G. Teng, J.M. Rotter; “Buckling and Collapse of Plate-End Pressure Vessels”, Proceedings Eleventh Australasian Conference on the Mechanics of Structures and Materials, Auckland, New Zealand, 367-372, Aug. 1988

 

J.M. Rotter; “Recent Research on the Strength of Circular Steel Silos”, Proceedings International Conference: ‘Silos- Forschung und Praxis’, 265-286, 01/10/1988

 

Q. Zhang, J.M. Rotter; “Equivalent Orthotropic Properties of Cylindrical Corrugated Shells”, Proceedings Eleventh Australasian Conference on the Mechanics of Structures and Materials, Auckland, New Zealand, 417-422, Aug. 1988

 

J.Y. Ooi, J.M. Rotter, T.S. Hull; “Triaxial Testing of Dry Granular Solids at Very Low Stresses”, Proceedings Eleventh Australasian Conference on the Mechanics of Structures and Materials, Auckland, New Zealand, 379-384, Aug. 1988

 

J.M. Rotter, Q. Zhang, J.G. Teng; “Corrugation Collapse in Circumferentially Corrugated Steel Cylinders”, First National Structural Engineering Conference, Melbourne, 377-383, August 1987

 

U.C. Sharma, J.M. Rotter, P.T. Jumikis; “Shell Restraint to Ringbeam Buckling in Elevated Steel Silos”, First National Structural Engineering Conference, Melbourne, 604-609, 01/08/1987

 

J.M. Rotter, J.G. Teng; “Elastic Stability of Cylindrical Shells with Circumferential Lap Joints”, First National Structural Engineering Conference, Melbourne, 515-521, 01/08/1987

 

M.A. Bradford, R.Q. Bridge, G.J. Hancock, J.M. Rotter, N.S. Trahair; “Australian Limit State Design Rules for the Stability of Steel Structures”, International Conference on Steel and Aluminium Structures, Cardiff, , 01/07/1987

 

J.M. Rotter; “The Buckling and Plastic Collapse of Ring Stiffeners at Cone/Cylinder Junctions”, Proceedings International Colloquium on Stability of Plate and Shell Structures, Ghent, 449-456, 01/04/1987

 

J.M. Rotter, P. Seide; “On the Design of Unstiffened Cylindrical Shells Subject to Axial Load and Internal Pressure”, Proceedings International Colloquium on Stability of Plate and Shell Structures, Ghent, 539-548, 01/04/1987

 

J.Y. Ooi, J.M. Rotter; “The effect of wall flexibility on pressures in squat steel silos,”, Conference Proceedings, 1986

 

J.M. Rotter; “Recent Studies of the Stability of Light Gauge Steel Silo Structures”, Proceedings Eighth International Specialty Conference on Cold-Formed Steel Structures, St. Louis, Missouri, 543-562, Nov. 1986

 

J.G. Teng, J.M. Rotter; “On the Out-of-Plane Buckling of Monosymmetric Rings”, Proceedings Tenth Australasian Conference on the Mechanics of Structures and Materials, Adelaide, 545-549, Aug. 1986

 

P.T. Jumikis, J.M. Rotter; “Buckling of Cylindrical Shells under Non-Uniform Torsion”, Proceedings Tenth Australasian Conference on the Mechanics of Structures and Materials, Adelaide, 211-216, Aug. 1986

 

R.Q. Bridge, L. Pham, J.M. Rotter; “Composite Steel , Concrete Columns- Design , Reliability”, Proceedings Tenth Australasian Conference on the Mechanics of Structures , Materials, Adelaide, 33-38, Aug. 1986

 

B.E. Gorenc, J.M. Rotter, L. Pham; “New I.E.Aust. Guidelines on Bin Loads”, Proceedings Second International Conference on Bulk Materials Storage Handling and Transportation, 76-81, 01/07/1986

 

J.M. Rotter; “The Analysis of Steel Bins Subject to Eccentric Discharge, Proc.”, Second International Conference on Bulk Materials Storage Handling and Transportation, 264-271, 01/07/1986

 

J.M. Rotter; “On the Significance of Switch Pressures at the Transition in Elevated Steel Bins”, Proceedings Second International Conference on Bulk Materials Storage Handling and Transportation, 82-88, 01/07/1986

 

L. Pham, J.M. Rotter, B.E. Gorenc; “The Use of Probabilistic Methods in the Derivation of Bin Loads for Structural Design”, Proceedings Second International Conference on Bulk Materials Storage Handling and Transportation, 104-109, 01/07/1986

 

P.T. Jumikis, J.M. Rotter, S.P. Fleming, S.J. Porter; “Experiments on the Buckling of Thin-Walled Model Silo Structures”, Proceedings Second International Conference on Bulk Materials Storage Handling and Transportation, 180-186, 01/07/1986

 

J.M. Rotter, L. Pham, J. Nielsen; “On the Specification of Loads for the Structural Design of Bins and Silos”, Proceedings Second International Conference on Bulk Materials Storage Handling and Transportation, 241-247, 01/07/1986

 

J.M. Rotter, P. Ansourian, N.S. Trahair; “A Survey of Recent Buckling Research on Steel Silos”, Proceedings Second International Conference on Bulk Materials Storage Handling and Transportation, 68-75, 01/07/1986

 

J.Y. Ooi, J.M. Rotter; “The Effect of Wall Flexibility on Pressures in Squat Steel Silos”, Proceedings Second International Conference on Bulk Materials Storage Handling and Transportation, 115-116, 01/07/1986

 

J.M. Rotter; “Buckling of Ground-Supported Cylindrical Steel Bins under Vertical Compressive Wall Loads”, Proceedings Metal Structures Conference, 112-127, 01/05/1985

 

J.M. Rotter, P.T. Jumikis; “Elastic Buckling of Stiffened Ringbeams for Large Elevated Bins”, Proceedings Metal Structures Conference, 104-111, 01/05/1985

 

J.M. Rotter; “Stability Problems in Cylindrical Bins under Axial Compression”, Proceedings, Joint US/Australian Workshop on the Loading, Analysis and Stability of Thin Shell Bins, Tanks and Silos, 106-117, 01/03/1985

 

N.S. Trahair, P. Ansourian, J.M. Rotter; “Stability Problems in the Structural Design of Steel Silos”, Proceedings, International Conference on Bulk Materials Storage, Handling and Transportation, Newcastle, 312-316, 01/08/1983

 

J.M. Rotter; “Ringbeams for Elevated Bins and Silos”, Proceedings, Metal Structures Conference, 111-116, 01/05/1983

 

J.M. Rotter; “Structural Effects of Eccentric Loading in Shallow Steel Bins”, Proceedings, Second International Conference on the Design of Silos for Strength and Flow, Stratford upon Avon, 446-463, Nov. 1983

 

J.M. Rotter; “Effective Cross-Sections of Ringbeams and Stiffeners for Bins”, Proceedings International Conference on Bulk Materials Storage Handling and Transportation,, 329-334, Aug. 1983

 

P.T. Jumikis, J.M. Rotter; “Buckling of Simple Ringbeams for Bins and Tanks”, Proceedings International Conference on Bulk Materials Storage, Handling and Transportation, 323-328, Aug. 1983

 

N.S. Trahair, P. Ansourian, J.M. Rotter; “Stability Problems in Axisymmetric Steel Silos”, Proceedings, Second International Conference on the Design of Silos for Strength and Flow, Stratford upon Avon, 434-445, Nov. 1983

 

J.M. Rotter; “Analysis of Ringbeams in Column-Supported Bins”, Eighth Australasian Conference on the Mechanics of Structures and Materials,, Aug.1982

 

J.M. Rotter; “Pressurised axially compressed cylinders “, Proceedings Int. Conf. on Carrying Capacity of Steel Shell Structures, Brno, 354-360, 1-3 October 1997

 

J.M. Rotter, N.S. Trahair, P. Ansourian; “Stability of Plate Structures”, Proceedings, Symposium on Steel Bins for the Storage of Bulk Solids, 36-40., Sept.

 

M.A. Bradford, R.Q. Bridge, G.J. Hancock, J.M. Rotter, N.S. Trahair; “Australian Limit State Rules for the Stability of Steel Structures”, First National Structural Engineering Conference, Melbourne, 209-216, 09/06/1905

 

J.G. Teng, J.M. Rotter; “A Study of Buckling in Column-Supported Cylinders, in Contact Loading and Local Effects in Thin-Walled Plated and Shell Structures, eds V. Krupka and M. Drdacky”, Proceedings International Union for Theoretical and Applied Mechanics Symposium, 52-61, 14/06/1905

 

J.M. Rotter; “The FELASH Suite of Programs for the Analysis of Axisymmetric Shells”, Proceedings Fourth International Conference on Civil and Structural Engineering Computing, London, Vol.1, 323-328., 11/06/1905

 

 

Edited works

 

A.S. Usmani, M.A. O’Connor, J.M. Rotter, A.Y. Elghazouli, D.D. Drysdale, A.M. Sanad, M. Gillie, S. Lamont; “Behaviour of Steel Framed Structures under Fire Conditions”, DETR-PIT Project, Final Report,, 2000

 

J.M.F.G. Holst, J.M. Rotter, C.R. Calladine; “Modelling of experiments on buckling under localized uplift in compressed cylindrical shells.”, University of Edinburgh, School of Civil and Environmental Engineering, 1996